Quick Answer

The HPI 105MM Universal Throttle Body is a high-flow drive-by-wire throttle body designed to increase airflow to the engine. It is commonly used on LS builds, boosted applications, race vehicles, and high-horsepower street builds where maximum airflow and improved throttle response are important.

A larger throttle body can help reduce airflow restriction, allowing the engine to breathe more efficiently at higher RPM levels and power levels.

👉 Shop the HPI 105MM Universal Throttle Body

What Does a 105MM Throttle Body Do?

The throttle body controls how much air enters the engine. When you press the accelerator pedal, the throttle blade opens and allows air to flow into the intake manifold.

A larger throttle body provides:

• Increased airflow capacity
• Reduced intake restriction
• Improved throttle response
• Better airflow at higher RPM
• Greater horsepower potential

Think of it like increasing the size of a doorway. More air can move through with less restriction.

Why Upgrade to a 105MM Throttle Body?

Most factory throttle bodies are designed around factory horsepower levels. Once modifications are added, airflow demand increases significantly.

Common modifications that benefit from a larger throttle body include:

• Performance camshafts
• Ported cylinder heads
• Aftermarket intake manifolds
• Turbochargers
• Superchargers
• Nitrous systems
• Increased displacement engines

A larger throttle body helps support these airflow demands.

What Engines Can Use a 105MM Throttle Body?

The HPI 105MM Universal Throttle Body is commonly used on performance engine combinations that require increased airflow and drive-by-wire throttle control.

How Much Power Can a 105MM Throttle Body Support?

Power capability depends on the entire engine combination, including intake manifold, cylinder heads, camshaft, forced induction setup, exhaust, and tuning.

However, 105mm throttle bodies are commonly used on builds producing:

• 500 HP
• 700 HP
• 1,000 HP
• 1,500+ HP

The larger opening provides the airflow capacity required by serious performance combinations.

Does a 105MM Throttle Body Increase Horsepower?

A throttle body alone typically does not create large horsepower gains. Instead, it removes airflow restrictions.

The biggest benefits are seen when combined with:

• Ported intake manifolds
• Performance camshafts
• Forced induction systems
• High-flow cylinder heads

In those applications, a larger throttle body can help the engine achieve its full potential.

Does a Larger Throttle Body Improve Throttle Response?

Yes. A larger, properly matched throttle body can improve airflow response when the throttle blade opens, especially on engines with supporting airflow modifications.

Many builders look for improvements such as:

• Sharper pedal feel
• Faster engine response
• Improved mid-range acceleration
• More immediate airflow delivery

Is a 105MM Throttle Body Good for Turbo Builds?

Absolutely. Turbocharged engines move enormous amounts of air, especially at higher boost levels and horsepower targets.

A larger throttle body helps:

• Reduce airflow restriction
• Improve boost efficiency
• Support higher horsepower levels
• Improve airflow consistency

This makes the HPI 105MM throttle body an excellent choice for boosted applications.

Is a 105MM Throttle Body Good for Supercharged Builds?

Yes. Superchargers force air into the engine, creating increased airflow demand. A restrictive throttle body can become a bottleneck.

Upgrading to a 105mm throttle body helps support:

• Increased airflow
• Better throttle response
• Higher power potential

Is a Tune Required?

In many cases, yes. While the engine may run after installation, tuning is recommended to optimize the new airflow characteristics.

A proper tune can help:

• Optimize airflow calculations
• Improve drivability
• Maximize power gains
• Maintain proper idle quality

Common Throttle Body Upgrade Mistakes

Buying Too Small

Future modifications may outgrow the throttle body. If your long-term goal includes boost, higher RPM, or more horsepower, airflow headroom matters.

Ignoring Intake Compatibility

Always verify your intake manifold supports the throttle body size and bolt pattern before purchasing.

Skipping the Tune

Many performance gains come from properly calibrating the ECU after installation.

Expecting Huge Gains Alone

Throttle bodies work best as part of a complete airflow package.

Frequently Asked Questions

Final Thoughts

The HPI 105MM Universal Throttle Body is designed for builders who want maximum airflow potential, improved throttle response, and support for serious horsepower levels.

Whether you're building a naturally aspirated LS engine, a turbocharged street car, or a high-horsepower race combination, a properly sized throttle body can help eliminate airflow restrictions and support your performance goals.