HPI Performance Tech Center
Changing Your LS Swap Plan in BC? Check These Parts Before Reordering
Posted by High Performance Injectors on
Use a change checklist when an LS project gains a different transmission, throttle system or controller so the next purchase matches the revised build.
Will LS3 Fuel Injectors Fit an LS1? Injector Height, Connectors and Adapters Explained
Posted by High Performance Injectors on
LS3 injectors can work in some LS1 combinations, but injector height, rail spacing, connector style and calibration must all match. This guide explains what to check before buying adapters or installing injectors.
- Tags: EV1 connector, EV14 injector, EV6 connector, fuel injector adapters, LS swap fueling, LS1 fuel injectors, LS3 fuel injectors
Buying an Unfinished LS Project in BC: Audit the Wiring Before Making an Offer
Posted by High Performance Injectors on
Evaluate the wiring side of an unfinished BC LS project with a documented component inventory, missing-parts list and questions for a qualified installer.
Ordering LS Swap Parts to Ontario: Build a Complete Checkout Record
Posted by High Performance Injectors on
Keep fitment advice, the selected harness, checkout totals and delivery documents together so an Ontario LS parts order is easier to verify.
- Tags: Build Planning, Canada, LS Swap Harnesses, Ontario
LS3 6L80E and 6L90E Swap Wiring: ECM, TCM, Pedal and Harness Requirements
Posted by High Performance Injectors on
Plan an LS3 swap with a 6L80E or 6L90E by matching the ECM, internal transmission controller, accelerator pedal, throttle body, harness and calibration.
- Tags: 6L80E swap wiring, 6L90E swap wiring, drive-by-wire pedal, LS swap ECM, LS3 6L80E harness, LS3 6L90E harness, LS3 standalone harness