Choosing an Auxiliary LED Light for a Polaris INDY

Posted by High Performance Injectors on

Straight groomed snowmobile trail lined with pines at dusk

A long groomed stretch and a tight stand of trees ask different things of the lights on an INDY. On an open section you may notice where the center of the beam fades. On the next turn you may notice how little of the shoulder the headlight picks up. Use both observations when shopping.

Start with what you notice on your usual loop

Think through where the existing light stops covering the area you’re looking at. Is it down the center of a straightaway, close to the edge of a curve, or both? That answer helps you decide whether a punch, flood or combination pattern makes sense.

Check the INDY name all the way to the trim

HPI’s fitment list includes several INDY configurations, such as the 2027 and 2023–2025 650 INDY SP 137. Other trims such as XC, XCR and VR1 have their own entries. Check the years next to your complete model name.

Compare controls before buying

HPI describes the Wide-Punch as following the existing high-beam switch. If your INDY already has an accessory light, check how it is wired and controlled before you plan the upgrade. Knowing what is already in the sled helps avoid ordering around an incorrect assumption.


Share this post



← Older Post Newer Post →