How the Wide-Punch Works With Your Polaris High Beam
Posted by High Performance Injectors on

For riders wondering about an extra switch, HPI describes the Wide-Punch as tied to the sled’s high beam. Selecting high beam is intended to activate the auxiliary assembly on a compatible installation. Think of the kit as adding a beam pattern to a control you already use.
Confirm the control behavior before leaving the shop
Ask the installer to demonstrate low beam and high beam with the sled stationary under the conditions specified by the manufacturer. You should be able to see when the auxiliary light comes on. If it stays on unexpectedly or fails to activate, return to the kit documentation and installer for diagnosis.
Look at the pattern from the rider’s position
From a stationary sled, observe where the center and edges appear on a neutral wall. The wall makes a practical reference if you later need to describe the pattern to the installer. Use the manufacturer’s guidance for final aim and check the applicable rules where you ride.
Know what changed
Your original high beam and the supplementary spot-and-flood pattern serve related roles. If you are evaluating what the accessory added, ask the installer how to document the stock setup and the completed installation under consistent conditions.